Sterilization temperature 110C to 135C EN-13060-2 class B sterilization cycle.
If you need discussion about this product, please click “Find Solution”. Or click the “Order Now” to buy now.
Features
Sterilization temperature 110°C to 135°C EN-13060-2 class B sterilization cycle
Pre-vacuum – water filling – heating – sterilizing – ventilation – post vacuum drying – end cycle.
Pre vacuum and post vacuum Drying system
Pre-vacuum for effective air removal that results in increasing sterilization performance. Post-vacuum for drying with remaining steam removal.
Microprocessor program controller with self auto-tuned and LCD monitor
7 pre-programmed cycle as 2 wrapped, 2 unwrapped liquid, Bowie-dick and 1 user programmable course.
Full Automatic operation system
Easy operation with full automatic process cycle by microprocessor controller from beginning to end cycle.
Self-diagnostic and safety system
In case of any malfunction, it alarms and displays error codes for easy maintenance, being stopped working with automatic ventilation process for safety purpose.
Flush cycle sterilization system
Can be supplied as optional order.
Air filtration cooling system
For the process of drying cycle, 0.2mm HEPA filtered clean air flows into the chamber in order to protect air contamination and to cool down below 60°C.
Safe and efficient water supply system
Automatic water supply mechanism which supplies a fixed volume of water to the chamber for maximum efficiency.
Automatic and manual door lock system
When the sliding handle is entered into the locking ring, the door automatically locks after two second. The door can be manually opened and locked using the locking wheel system.
Space saving compact design
Maximize working capacity with square chamber and minimize foot space with dedicated engineering design.
Safety mechanism
- Over pressure release valve
- Over temperature protector with Thermostat
- Higher temp set protector by Digital high alarm limit
- Visial and audible alarm system
- Automatic dual door locking system
Programmed Sterilization Cycle
MODEL | Temperature (°C) | Pressure (kgf / cm2) | Sterilizing Time (min) | Drying Time (min) |
Unwrapped 1 | 121 | 1.1 | 20 | 30 |
Unwrapped 2 | 134 | 2.1 | 5 | 30 |
Wrapped 1 | 121 | 1.1 | 30 | 30 |
Wrapped 2 | 134 | 2.1 | 15 | 30 |
Liquid | 121 | 1.1 | 20 | 0 |
Bowie Dick | 134 | 2.1 | 4 | 5-10 |
User Program | 100-135 | 0.1-2.3 | 4-30 | 0-60 |
Model | LAC-1011SV | LAC-1021SV | LAC-1031SV | |
Dimensions (W x D x H mm) | Inner | 410 x 560 x 345 | 490 x 655 x 460 | 510 x 755 x 545 |
Outer | 200 x 300 x 200 | 270 x 405 x 230 | 300 x 455 x 300 | |
Capacity | 12ℓ | 25ℓ | 40ℓ | |
Heater | 2kW | 2.5kW | 3kW | |
Tray | 180 x 260 mm | 250 x 360 mm | 290 x 400 mm | |
Wire tray (Standard) / Perforated tray (Option) | ||||
Chamber Type | Reinforced and electro polished square chamber | |||
Material | Stainless Steel 304 standard (STS 316 L option) | |||
Door lock mechanism | Automatic wheel inter locking with one touch sliding handle | |||
Vacuum Pump | Built-in diaphragm vacuum pump 25 LPM capacity | |||
Controller | Microprocessor Program Controller with LCD Monitor | |||
Sterilization | Temp Range | 110°C ~ 135°C | ||
Pressure Range | 0.4 ~ 2.3kgf/cm2 | |||
Course | Unwrapped 1&2 / Wrapped 1&2 / Liquid / Bowie-Dick / User program mode | |||
Reservior | 6ℓ stainless steel tank with top water filling inlet and silicon closer | |||
Safety | Over pressure release valve, Over temperature protector, | |||
Visible and Audible alarm system, Automatic dual door locking system | ||||
Electric Supply | 110V 60Hz or 220V 50/60Hz |
Electronically controlled shaking mechanism provieds quiet orbital motion precise speed control and digital display. Shaking Motion can stop automatically when door is opened.
Infra-Red CO2 Sensor by digital signal processing with automatic temperature compensation and auto zero calibration. Provides precise temperature control up to 60ºC, timer, alarm, auto-tunning.
Ideal for general laboratory incubation require temperature range from ambient +5°C to 70°C with precision digital PID controller.
Air Leak Proof Cabinet Structure with High clean stainless steel interior work station and epoxy powder coated steel exterior for long durability.
Air Leak Proof Cabinet Structure with High clean stainless steel interior work station and epoxy powder coated steel exterior for long durability.
Ideal for drying, conditioning, sterilizing and quality control even the most laboratory application temperature between ambient +5°C to 250°C maximum.
Ideal for baking, drying, conditioning, sterilizing and quality control even the most critical laboratory application temperature between ambient to 250°C
This is ideal for applications in the fields of biotechnology (Biotechnology), pharmacy (Clinical), environment (Environmental), food and health industries (Medical and Food Industry). A top-loading type sterilizer makes it easy to insert tools and materials to be sterilized, even in large volumes.
Sterilization temperature 110C to 135C EN-13060-2 class B sterilization cycle
This is ideal for applications in the fields of biotechnology (Biotechnology), pharmacy (Clinical), environment (Environmental), food and health industries (Medical and Food Industry). A top-loading type sterilizer makes it easy to insert tools and materials to be sterilized, even in large volumes.
Provides high precision temperature, relative humidity, illumination and CO2 control for uniform and stable growth environment.
Ultrasonic Cleaner is faster, more through and safer than any other method-scrubbing, soaking,steam and so on. Ultrasonic sound wave moving through a cleaning solution an effect called cavitation, the rapid formation and implosion of microscopic bubbles. Heat enhances the process. The deep action of ultrasonic removes even the most subborn dirt and contaminants.
Excellent Performance by Unique Designed Structure and Air Flow System.
Laminar Air flow and Uniform air velocity provide high clean filter air for high performance
Laminar Air flow and Uniform air velocity provide high clean filter air for high performance
The high performance ULPA and HEPA filters produce a class 100 or better Clean Air Environment.
Laminar Airflow and Uniform air velocity provide high clean filter air for high performance.