Dibawah ini adalah informasi produk dari Dissolution Tester 800i. Untuk diskusi produk bisa menghubungi kontak PT. Andaru Persada Mandiri via whatsapp 087777277740 atau telepon 0251-7504679.
Dissolution: DISi Series – Dissolution Tester 800i
Expertly engineered systems for everyday dissolution testing
Meeting the latest specifications as laid down in the European, United States and associated Pharmacopoeias, the DISi Series from Copley is a range of reliable and cost-efficient dissolution tester systems designed with the highest standards of solid dosage testing performance in mind.
Ideal for use in both R&D and QC environments, the DISi Series is equipped with precision ground shafts that will accept any of the baskets, paddles or rotating cylinders described in the Ph. Eur., USP and associated Pharmacopoeias.
Designed to minimise user training and reduce the burden of routine equipment maintenance, the DISi Series simplifies the dissolution testing process, without compromising on data quality.
Baca juga: Promo Alat Laboratorium
Key DISi Series Highlights – Dissolution Tester 800i
- Eur. and USP compliant
- Intuitive touchscreen control to simplify operation
- Six and eight test station unit configurations available
- Wide speed range to accommodate broad scope of methods
- Integrated, precision temperature control and measurement
- Single-point electronic temperature calibration
- Extensive data reporting output options: RS 232, USB A and USB B
- Option to automate and remotely control DISi Series systems
DISi Series: Key Features – Dissolution Tester 800i
- Easy-clean Viton® membrane-sealed zero-evaporation lids included as standard
- Intuitive touchscreen control with icon-based menu structure simplifies operation
- Robust metal case with advanced corrosion protective coating
- PT100 temperature probe monitors bath and vessel temperature with electronic calibration feature
- Independent digital heater/circulator maintains a constant temperature and minimises vibration
- ‘Easy-Centre’ centring system for precise vessel positioning
- Maximum fill line indicator
- Convenient screw-in basket/paddles enable easy method change in seconds
- All vessels are serial-numbered as standard
- Easily removable leak-proof water bath with convenient drain tap eases bath water emptying
Note: Full automation-compatible to support high-throughput workflows
Reporting – Dissolution Tester 800i
Extensive data output options are available as standard, including direct reporting to a printer or PC.
Reported parameters
Speed (revolutions per minute)
- Set
- Average
- Maximum
- Minimum
Temperature (°C)
- Set
- Average
- Maximum
- Minimum
Test Duration (HH:MM:SS)
- Set
- Actual
Calibration Data
- Calibration date
- Temperature calibrated at (°C)
Dissolution Tester 800i
Maximising visibility and access to the critical sampling area above the bath, the DIS 800i represents the very latest in tablet testing technology.
Ideal for use in both R&D and QC environments, the DIS 800i is equipped with precision ground shafts that will accept any of the baskets, paddles or rotating cylinders described in the Ph. Eur., USP and associated Pharmacopoeias.
| Cat. Number | 1338 |
| No. Stirred Vessels | 8 |
| Ph. Eur. and USP Test Methods Supported | 1,2,5,6 |
| Heater | Low vibration independent external digital heater/circulator |
| Unit Dimensions (w x d x h) | 728 x 495 x 689 mm (unit)
260 x 330 x 150 mm (heater) |
DISi Series: Technical Specifications – Dissolution Tester 800i
| Pharmacopoeial Compliance | Ph. Eur. Chapters: 2.9.3, 2.9.4
USP Chapters: <711><724><711><724> |
| User Interface | Resistive touchscreen |
| Speed Range | 20 – 220 rpm +/- 2% |
| Heater Accuracy | ± 0.1°C |
| Heater Temperature Range | Ambient – 50°C |
| Vibration Elimination | Low vibration heaters |
| Test Run Time | Up to 99 hours, 59 minutes, 59 seconds |
| Alarm(s) | 1. End of testing (audible)
2. Low bath water level warning on-screen indicator |
| Data Output | RS 232
USB A (for connection with a USB printer) USB B (for connection with a PC) |
Temperature Calibration – Dissolution Tester 800i
Single-point electronic temperature calibration.
Calibration of the DISi Series temperature probe is simple, through the use of an electronic calibration key and passcode-protected calibration menu designed to guide users through the process without fuss. The latest temperature probe calibration information is stored and available to print/export when convenient to the user.
DISi Series
| Cat. No. | Description |
| 1336 | Dissolution Tester DIS 600i (incl. 6 Drive Shafts) |
| 1338 | Dissolution Tester DIS 800i (incl. 8 Drive Shafts) |
| 1209 | Electronic Temperature Calibration Key |
| 1309 | IQ/OQ/PQ Documentation Pack |
| 1307 | Printer (including USB cable) |
Sumber informasi produk didapat dari website principle langsung pada tautan berikut : copley
Demikian informasi produk Dissolution Tester 800i. Bagi anda yang membutuhkan diskusi cepat produk ini bisa menghubungi contact PT. Andaru Persada Mandiri via whatsapp 087777277740 atau telepon 0251-7504679. Link alamat kami sertakan pada Google Maps.
