The M5000 provides fast, easy and automatic examination of powdery substances with a melting point up to 400 °C.
If you need discussion about this product, please click “Find Solution”. Or click the “Order Now” to buy now.
Fully automatic measurements
The M5000 provides fast, easy and automatic examination of powdery substances with a melting point up to 400 °C. Due to the automatic determination of the melting point, an objective measurement result is always guaranteed. The high preheating rate and the integrated fan cooling allow fast and reliable measurements in any temperature range. The display provides a well-arranged readout of all important measuring data.
Your advantages
- Fully automatic measurement
- 1 capillary intake
- LCD display
- Alarm signal when reaching the melting point
- Fast cooling through integrated fan
- Digital display of all important data
- Display in German or English
- With RS-232 interface for printer CBM910
- Easy-to-clean membrane keypad
- Includes protective cover and 100 capillaries
- Small sample volume
Typical applications
The determination of the melting point is of great importance in the identity test, since many substances can be determined by their melting point.
The purity of substances can also be qualitatively measured via melting point. A well-defined melting point is only given for 100 percent pure substances. Due to impurities, such as impurities or dopants, most substances have a melting interval (beginning of the melt to completion of the melt) of a few degrees Celsius. Even impurities during the manufacture of chemicals cause this melting point to expand to a melting interval. As a result, most substances that are examined with a melting point meter have a melting interval. This effect is used to identify the degree of impurity of the substance.
MEASURING RANGE | 25–400 °C |
ACCURACY | ±0.3 °C (25–200 °C) |
±0.5 °C (200–400 °C) | |
RESOLUTION | 0.1 °C |
PREHEATING RATE | To 300 °C approx. 4.0 min |
To 400 °C approx. 7.5 min | |
HEATING RATE | 1 °C min-1 |
No. OF CAPILLARIES | 1 |
CAPILLARY Ø | 1.4 mm |
INTERFACE | RS-232 |
IP CODE | IP20 |
POWER SUPPLY | 90–264 V |
DIMENSIONS (W X H X D) | 220 mm x 150 mm x 340 mm |
WEIGHT | 4.1 kg |
Melting Point Meter for Semi-Automatic Measurements. The M3000 provides fast and easy examination of powdery substances with a melting point up to 360°C.
Melting point meter for automatic measurements. The M5000 provides fast, easy and automatic examination of powdery substances with a melting point up to 400 °C.
Density meters for manual sample supply Set 1 / Set 2. The right decision for low sample volumes.
Density meters for semi-automatic sample supply Set 3. High efficiency and special suitability for hazardous substances.
Density Meters DS7800 for Full-Automatic Sample Supply(Set 4 / Set 5). Fully automatic execution of the entire measuring process.
Digital Refractometers without Temperature Control. Specialists for sugar containing solution.
Digital Refractometers with Peltier Temperature Control. Allrounder for measuring all liquid and pastes.
Digital Refractometers with Automation. An optional solution for high sample volume.
Abbe Refractometer Analog(AR4) – Refractive index and % Brix can be measured and read via an eyepiece.
Digital Abbe refractometer (AR2008) – Refractive index and % Brix can be measured and displayed digitally.
Digital Handheld Refractometers DR101-60, DR201-95 and DR301-95. Digital on-site measurements at the touch of a button.