Spectrophotometer Halo DB-20 / DB-20S

The Halo DB-20 is a high performance double beam spectrophotometer suitable for many analytical applications where a higher level of accuracy is required.

If you need discussion about this product, please click “Find Solution”. Or click the “Order Now” to buy now.

Genuine Double Beam Optics

True double beam optics ensure concurrent measurement of the sample and reference for improved stability, accuracy and reproducibility. The light beam is split in two using a half mirror so that one beam passes through the sample side whilst the other passes through the reference side. Both beams are then measured on individual detectors. The reference side beam also acts to stabilize photometric values in a similar manner to the ratio beam principle.

Spectral Features

Coma aberration elimination from the concave diffraction grating achieves a high resolution 1.5 nm (DB-20S : 1nm) spectral bandpass and certifies compliance of the Halo DB-20 to the stringent European Pharmacopoeia standards. Other specifications include an impressive wavelength accuracy of ±0.3nm, noise level 0.0003Abs (500nm) and stray light ≤0.05% (220nm NaI, 340nm NaNO2).

Built-in and Diverse Range of Measurement Modes

Photometry Mode. Perform quantitative analyses in either absorbance or transmittance modes. Select from single wavelength, up to 6 different individual wavelengths, nucleic acid/protein A260/ A280 ratios and set up calibration curves with up to 20 standards for concentration measurements.

Time Scan: Perform kinetic measurements for time periods ranging from 1 minute to >27 hours. Measurement intervals are factory preset and automatically selected when the scan time is set.

Wavelength scan: Perform a full spectral scan from 190 to 1,100nm at any of 8 incremental and preset selectable scan speeds starting from a high resolution 10nm/minute up to a swift 3,600nm / minute. Data is displayed as either numerical values or a graphical spectrum. Furthermore perform downstream processing of data, such as peak / valley search or smoothing, directly on board or with the optional Halo UV Detective software.

Dual Lamp Advantage

By virtue of the long life, halogen tungsten and deuterium lamps, the Halo DB-20s wavelength range is an extensive 190nm – 1,100nm. Furthermore, the dual lamp system results in higher accuracy than corresponding xenon lamps. Lamp switching is automatic and selectable from a wavelength range of 325nm to 370nm.

User Friendly Operation and Information Rich LCD Display

The extra large 165mm x 122mm, backlit LCD screen with adjustable brightness control displays a large array of data also in graphical format. The seamless and chemical resistant keypad is designed for easy and quick selection of navigation and function features whilst protecting against any laboratory spills. Other unique features include the ‘GO TO WL’ short cut key to allow direct input of a new wavelength into an existing measurement.

Validation Functions

To ensure optimum instrument performance, self-diagnosis incorporating a number of parameters and wavelength calibration are automatically initiated upon start-up. Furthermore the Halo DB-20 is equipped with a GLP/GMP feature for analyses requiring validation and auditing. Parameters such as wavelength accuracy, wavelength reproducibility, bandpass, baseline flatness, baseline stability and noise level can be all validated and the audit report printed.

Stand alone or PC Operation

The Halo DB-20 is fully equipped and capable of executing all functions in stand alone mode. Simply connect a standard laser printer for direct printouts of data and graphs. For more advanced control, analyses and reporting, the simple slide of a switch places the Halo DB-20 under the direct control of the optional UV Detective software installed on a computer with Windows® XP or Windows®7 operating system.

On-Board Data Storage

Up to 20 operating programs and up to 10 sets of measurement data can be stored in the flash memory of the Halo DB-20. Programs can easily be recalled, edited and deleted. Furthermore, when in stand alone mode, data (in text format) can be downloaded directly to an external memory stick via the USB port and transferred for further processing to any computer loaded with commercial spreadsheets (such as Microsoft® Excel)

TypeDB-20DB-20S
OpticsConcave diffraction grating / Double Beam Principle
Wavelength Range190nm -1,100 nm
Spectral Bandwidth1.5 nm1.0 nm
Stray Light≤0.05% (220nm NaI, 340nm NaNO2)≤0.10% (220nm NaI, 340nm NaNO2)
Wavelength Accuracy±0.3nm
Photometric RangeAbsorbance: -3 to +3 %T: 0% to 300%T Concentration: 0,000 to 9,999
Wavelength Scan Speed10, 100, 200, 400, 800, 1,200, 2,400, 3,600 nm/minute
Baseline Stability0.0003 Abs/hr (500nm, after 2 hours)
Noise Level0.0003 Abs (500nm)
Light SourceTungsten-Halogen and Deuterium Lamps
Light Source SwitchingAutomatic switching selectable from 325nm to 370nm
DetectorSilicon Photodiode
DisplayBack-lit LCD 165(W) x 122(H) mm
Dimensions505(W) x 590(D) x 265(H) mm
Net Weight29Kg
Gross Weight35Kg
Power Requirements110 – 220 V selectable, 50/60Hz

Halo BIOmaster allows measurement of nucleic acid concentrations and purity (using ratio function) including protein concentrations. As a high quality spectrophotometer,the Biomaster features touch screen operation packaged as a lightweight system with a compact footprint for life science and education related applications.

The Halo DNAmaster complements the existing range of Halo spectrophotometers and plate readers. It is designed for the measurement and analysis of precious samples by requiring only microvolume quantities. 

The Halo XB-10 and VIS-20 are high quality, touch screen operation, compact measurement systems for daily analysis in education, quality control and basic research

The Halo DB-20 is a high performance double beam spectrophotometer suitable for many analytical applications where a higher level of accuracy is required.

The Halo RB-10 is a ratio beam spectrophotometer with an extensive array of built in functions for versatility and suitability to many analytical and biological applications. The ratio beam optics impart greater accuracy and reproducibility than the conventional, single beam optics.

The Halo SB-10 single beam spectrophotometer combines exceptional value with precision spectrophotometry in an uncomplicated package.

The MPR-96 Microplate Reader extends the Halo range to facilitate higher throughput analyses of experiments consisting of an array of micro-volume reactions typically in a 96 well plate format. Naturally the MPR-96 features the same ruggedness, reliability, precision and reproducibility synonymous with the Halo family. 

The MTP-601F is a reliable and high sensitive PMT based automatic fluorometer. It’s ideal for a wide range of fluorescence-based ELISA and measurements including cytokines, growth factors, cytosolic Ca2+, proteases and DNase.

Halo LED 96 is a computer-controlled microplate reader for 96 well plates. Easy and safe operation takes away the hassle from your daily microplate reading jobs.

GelView Master series is designed to be easy to use built on advanced technology and unique features.

WhatsApp chat